Research Output

Publications

Publications and selected papers across manufacturing engineering, process innovation, and advanced processing.

Publications are listed in reverse chronological order and reflect the lab’s work across additive manufacturing, electrochemical jet processing, structured materials, surface engineering, and process capability.

Publications

The publication record spans both fundamental and applied work, with a strong emphasis on process understanding, measurement, materials response, and engineering routes to more reliable manufacturing outcomes.

Selected

  1. top30/l6Q3WhenKVUC.svg
    High deposition rate powder-and wire-based laser directed energy deposition of metallic materials: A review
    Zuo Li, Shang Sui, Xu Ma, and 6 more authors
    International Journal of Machine Tools and Manufacture, 2022
    Link
  2. top30/sbeIDTyQOFgC.svg
    Alloy design and adaptation for additive manufacture
    Adam T Clare, Rajiv S Mishra, Marion Merklein, and 5 more authors
    Journal of Materials Processing Technology, 2022
    Link
  3. top30/0sTkTiv_uMkC.svg
    Surface integrity in metal machining-Part I: Fundamentals of surface characteristics and formation mechanisms
    Zhirong Liao, Andrea Monaca, James Murray, and 5 more authors
    International Journal of Machine Tools and Manufacture, 2021
    Link
  4. top30/8VtEwCQfWZkC.svg
    The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion
    S Sanchez, G Gaspard, CJ Hyde, and 3 more authors
    2021
    Link
  5. top30/NtCmTCuxid4C.svg
    Powder Bed Fusion of nickel-based superalloys: A review
    Salomé Sanchez, Peter Smith, Zhengkai Xu, and 6 more authors
    International Journal of Machine Tools and Manufacture, 2021
    Link
  6. top30/XAp-VaTZjjwC.svg
    Surface integrity in metal machining-Part II: Functional performance
    Andrea La Monaca, James W Murray, Zhirong Liao, and 5 more authors
    International Journal of Machine Tools and Manufacture, 2021
    Link
  7. top30/aDl3D7KC1E4C.svg
    Additive manufacturing of metamaterials: A review
    Meisam Askari, David A Hutchins, Peter J Thomas, and 12 more authors
    Additive Manufacturing, 2020
    Link
  8. top30/WWeOtg8bX_EC.svg
    The influence of iron in minimizing the microstructural anisotropy of Ti-6Al-4V produced by laser powder-bed fusion
    Marco Simonelli, David Graham McCartney, Pere Barriobero-Vila, and 4 more authors
    2020
    Link
  9. top30/RMgMIBzvq-4C.svg
    Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion
    Sam Catchpole-Smith, Richard RJ Sélo, AW Davis, and 3 more authors
    2019
    Link
  10. creep-in718-pbf.jpg
    Creep behaviour of inconel 718 processed by laser powder bed fusion
    Zhengkai Xu, CJ Hyde, C Tuck, and 1 more author
    2018
    Link
  11. top30/DXE8ND7PrJAC.svg
    Effect of post processing on the creep performance of laser powder bed fused Inconel 718
    Z Xu, JW Murray, CJ Hyde, and 1 more author
    2018
    Link
  12. top30/PQEM9vzQD9gC.svg
    Spatter and oxide formation in laser powder bed fusion of Inconel 718
    B Szost, X Wang, D Johns, and 3 more authors
    2018
    Link
  13. top30/qmtmRrLr0tkC.svg
    A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks
    Marco Simonelli, Nesma T Aboulkhair, Philip Cohen, and 4 more authors
    2018
    Link
  14. top30/_AeoHAGD03cC.svg
    A comparative study of Inconel 625 laser cladding by wire and powder feedstock
    TE Abioye, PK Farayibi, and AT Clare
    2017
    Link
  15. top30/nPT8s1NX_-sC.svg
    Fractal scan strategies for selective laser melting of ‘unweldable’nickel superalloys
    Sam Catchpole-Smith, Nesma Aboulkhair, Luke Parry, and 3 more authors
    2017
    Link
  16. top30/nqdriD65xNoC.svg
    Materials for additive manufacturing
    David Bourell, Jean Pierre Kruth, Ming Leu, and 4 more authors
    2017
    Link
  17. top30/s85pQhAUCrAC.svg
    Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces
    Andrea Colombi, Victoria Ageeva, Richard J Smith, and 7 more authors
    2017
    Link
  18. top30/z8nqeaKD1nsC.svg
    Energy distribution modulation by mechanical design for electrochemical jet processing techniques
    Jonathon Mitchell-Smith, Alistair Speidel, Jennifer Gaskell, and 1 more author
    2017
    Link
  19. top30/AzKEL7Gb_04C.svg
    Manufacturing at double the speed
    Julian M Allwood, Tom HC Childs, Adam T Clare, and 15 more authors
    2016
    Link
  20. top30/BJrgspguQaEC.svg
    Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel
    Samer J Algodi, James W Murray, Michael W Fay, and 2 more authors
    2016
    Link
  21. top30/G1UMdFYMoxkC.svg
    Spatially resolved acoustic spectroscopy for selective laser melting
    Richard J Smith, Matthias Hirsch, Rikesh Patel, and 3 more authors
    2016
    Link
  22. top30/KWzIFqRkAKkC.svg
    Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating
    TE Abioye, PK Farayibi, DG McCartney, and 1 more author
    2016
    Link
  23. top30/NMlhSUseqAsC.svg
    Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
    Ian Maskery, NT Aboulkhair, MR Corfield, and 6 more authors
    2016
    Link
  24. top30/RtRctb2lSbAC.svg
    Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
    Sarah K Everton, Matthias Hirsch, Petros Stravroulakis, and 2 more authors
    Materials & Design, 2016
    Link
  25. top30/s9ia6_kGH2AC.svg
    Machining of additively manufactured parts: implications for surface integrity
    Olusola Oyelola, Peter Crawforth, Rachid M’Saoubi, and 1 more author
    2016
    Link
  26. top30/Zh0EY9V9P6UC.svg
    Electrochemical jet machining of titanium: overcoming passivation layers with ultrasonic assistance
    J Mitchell-Smith, and AT Clare
    2016
    Link
  27. top30/A8cqit5AE6sC.svg
    Laser cladding of Inconel 625 wire for corrosion protection
    TE Abioye, DG McCartney, and AT Clare
    2015
    Link
  28. top30/hqOjcs7Dif8C.svg
    A parametric study of Inconel 625 wire laser deposition
    TE Abioye, J Folkes, and AT Clare
    2013
    Link
  29. top30/9yKSN-GCB0IC.svg
    Cladding of pre-blended Ti–6Al–4V and WC powder for wear resistant applications
    PK Farayibi, J Folkes, A Clare, and 1 more author
    2011
    Link

All publications

  1. Repair system for a surface of a workpiece
    Adam Thomas Clare
    2025
    US Patent 12,275,106
    Link
  2. A New Cutting Mechanics Model for Improved Shear Angle Prediction in Orthogonal Cutting Process
    Farshad Kazemi, Chunlei Song, Adam T Clare, and 1 more author
    Journal of Manufacturing Science and Engineering, 2025
    DOI
  3. Residual stress prediction in machining of parts fabricated by directed energy deposition
    Shenliang Yang, Alistair Speidel, Adam T Clare, and 2 more authors
    Additive Manufacturing, 2025
    DOI
  4. A facile methodology to identify microstructural grains on etched surfaces using panoptic segmentation
    Thomas Girerd, Giovanna Martı́nez-Arellano, Adam Thomas Clare, and 1 more author
    Materials Characterization, 2025
    DOI
  5. Heat and Mass Transfer in Spatially Oscillating Laser Powder Bed Fusion
    I Bitharas, K Perkins, D Della Crociata, and 4 more authors
    Additive Manufacturing, 2025
    DOI
  6. A new approach to laser DED as a repair technology with Laser Mesh Deposition
    Thomas Girerd, Richard Adamson, Andres Gameros, and 3 more authors
    Additive Manufacturing Letters, 2025
    DOI
  7. Metal multi-material additive manufacturing: Overcoming barriers to implementation
    AT Clare, P Woizeschke, B Rankouhi, and 4 more authors
    CIRP Annals, 2025
    DOI
  8. A facile method to create continuum stochastic sheet-based cellular materials
    B Clayton, A Bahmani, JH Groth, and 2 more authors
    Additive Manufacturing, 2025
  9. Electrochemical jet machining of Ti-alloys in a deep eutectic solvent electrolyte
    Thomas Girerd, Adam T Clare, and Alistair Speidel
    Procedia CIRP, 2025
  10. Machining Mechanics of Additively Manufactured Metallic Parts: Material Characterization and Constitutive Modeling
    Farshad Kazemi, Adam T Clare, and Xiaoliang Jin
    Additive Manufacturing, 2025
    DOI
  11. Defect evolution and mitigation in metal extrusion additive manufacturing: from deposition to sintering
    Sajad Hosseinimehr, Ahmad Mohammadpanah, Michael J Benoit, and 5 more authors
    2024
    Link
  12. Modulation of melt pool behaviour using novel laser beam oscillation methods
    T Girerd, A Gameros, M Simonelli, and 2 more authors
    2024
    Link
  13. Informing directed energy deposition strategies through understanding the evolution of residual stress
    Shenliang Yang, Adam T Clare, Chris Bennett, and 1 more author
    2024
    Link
  14. Adapting ‘tool’size using flow focusing: a new technique for electrochemical jet machining
    Ivan Bisterov, Sidahmed Abayzeed, Alistair Speidel, and 3 more authors
    2023
    Link
  15. Facile manipulation of mechanical properties of Ti-6Al-4V through composition tailoring in laser powder bed fusion
    Xi Du, Marco Simonelli, James W Murray, and 1 more author
    2023
    Link
  16. On-machine measurement with an electrochemical jet machine tool
    Ivan Bisterov, Sidahmed Abayzeed, Alistair Speidel, and 1 more author
    2022
    Link
  17. Jan-Hendrik Groth, Caelan Anderson, Mirco Magnini, and 2 more authors
    2022
  18. Electrochemical jet manufacturing technology: From fundamentals to application
    Alistair Speidel, Ivan Bisterov, Krishna Kumar Saxena, and 4 more authors
    International Journal of Machine Tools and Manufacture, 2022
    Link
  19. Evaluating the thermal characteristics of laser powder bed fusion
    Tatsuaki Furumoto, Kazushi Oishi, Satoshi Abe, and 3 more authors
    2022
    Link
  20. The interaction of volatile metal coatings during the laser powder bed fusion of copper
    Alistair Speidel, Matthew D Wadge, Leonidas Gargalis, and 6 more authors
    2022
    Link
  21. Chemical recovery of spent copper powder in laser powder bed fusion
    Alistair Speidel, Leonidas Gargalis, Jianchao Ye, and 5 more authors
    2022
    Link
  22. top30/l6Q3WhenKVUC.svg
    High deposition rate powder-and wire-based laser directed energy deposition of metallic materials: A review
    Zuo Li, Shang Sui, Xu Ma, and 6 more authors
    International Journal of Machine Tools and Manufacture, 2022
    Link
  23. Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering
    Peifeng Li, Fang Xu, Stuart Robertson, and 4 more authors
    2022
    Link
  24. top30/sbeIDTyQOFgC.svg
    Alloy design and adaptation for additive manufacture
    Adam T Clare, Rajiv S Mishra, Marion Merklein, and 5 more authors
    Journal of Materials Processing Technology, 2022
    Link
  25. Enhanced mechanical properties of in situ synthesized TiC/Ti composites by pulsed laser directed energy deposition
    Yongxia Wang, Hua Tan, Zhe Feng, and 4 more authors
    2022
    Link
  26. Composition fine-tuning for directed energy deposition of Ti-6Al-4V
    Fengying Zhang, Kun Wang, Yao Li, and 4 more authors
    2022
    Link
  27. Electrolytic-dielectrics: a route to zero recast electrical discharge machining
    Shamraze Ahmed, Alistair Speidel, James W Murray, and 3 more authors
    2022
    Link
  28. Magnetic manipulation in directed energy deposition using a programmable solenoid
    Peter H Smith, James W Murray, Alex Jackson-Crisp, and 2 more authors
    2022
    Link
  29. top30/0sTkTiv_uMkC.svg
    Surface integrity in metal machining-Part I: Fundamentals of surface characteristics and formation mechanisms
    Zhirong Liao, Andrea Monaca, James Murray, and 5 more authors
    International Journal of Machine Tools and Manufacture, 2021
    Link
  30. top30/8VtEwCQfWZkC.svg
    The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion
    S Sanchez, G Gaspard, CJ Hyde, and 3 more authors
    2021
    Link
  31. In-situ alloying in powder bed fusion: The role of powder morphology
    Marius S Knieps, William J Reynolds, Juliette Dejaune, and 2 more authors
    2021
    Link
  32. Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry
    Leonidas Gargalis, Jianchao Ye, Maria Strantza, and 6 more authors
    2021
    Link
  33. Magnetically assisted directed energy deposition
    Peter H Smith, James W Murray, Daniel O Jones, and 2 more authors
    2021
    Link
  34. Design of a resonant Luneburg lens for surface acoustic waves
    Rafael Fuentes-Domínguez, Mengting Yao, Andrea Colombi, and 7 more authors
    2021
    Link
  35. top30/NtCmTCuxid4C.svg
    Powder Bed Fusion of nickel-based superalloys: A review
    Salomé Sanchez, Peter Smith, Zhengkai Xu, and 6 more authors
    International Journal of Machine Tools and Manufacture, 2021
    Link
  36. Unveiling surfaces for advanced materials characterisation with large-area electrochemical jet machining
    Alistair Speidel, Dongdong Xu, Ivan Bisterov, and 2 more authors
    2021
    Link
  37. Multi-laser scan strategies for enhancing creep performance in LPBF
    Salomé Sanchez, CJ Hyde, IA Ashcroft, and 2 more authors
    2021
    Link
  38. Unprocessed machining chips as a practical feedstock in directed energy deposition
    James W Murray, Alistair Speidel, Alexander Jackson-Crisp, and 3 more authors
    2021
    Link
  39. Post processing of additively manufactured parts using electrochemical jet machining
    Alistair Speidel, Richard Sélo, Ivan Bisterov, and 2 more authors
    2021
    Link
  40. Tailoring grain morphology in Ti-6Al-3Mo through heterogeneous nucleation in directed energy deposition
    Fengying Zhang, Panpan Gao, Hua Tan, and 5 more authors
    2021
    Link
  41. On the use of multiple layer thicknesses within laser powder bed fusion and the effect on mechanical properties
    Alex Gullane, James W Murray, Christopher J Hyde, and 3 more authors
    2021
    Link
  42. top30/XAp-VaTZjjwC.svg
    Surface integrity in metal machining-Part II: Functional performance
    Andrea La Monaca, James W Murray, Zhirong Liao, and 5 more authors
    International Journal of Machine Tools and Manufacture, 2021
    Link
  43. Laser calorimetry for assessment of melting behaviour in multi-walled carbon nanotube decorated aluminium by laser powder bed fusion
    Adam T Clare, William J Reynolds, James W Murray, and 5 more authors
    2020
    Link
  44. top30/aDl3D7KC1E4C.svg
    Additive manufacturing of metamaterials: A review
    Meisam Askari, David A Hutchins, Peter J Thomas, and 12 more authors
    Additive Manufacturing, 2020
    Link
  45. Formation of thick electrical discharge coatings
    Nuhaize Ahmed, James W Murray, Takashi Yuzawa, and 5 more authors
    2020
    Link
  46. Dry-sliding wear and hardness of thick electrical discharge coatings and laser clads
    James W Murray, Nuhaize Ahmed, Takashi Yuzawa, and 4 more authors
    2020
    Link
  47. A novel numerical method to predict the transient track geometry and thermomechanical effects through in-situ modification of the process parameters in Direct Energy Deposition
    TR Walker, CJ Bennett, TL Lee, and 1 more author
    2020
    Link
  48. Machining of directed energy deposited Ti6Al4V using adaptive control
    Olusola Oyelola, Alexander Jackson-Crisp, Pete Crawforth, and 4 more authors
    2020
    Link
  49. Microstructures and mechanical behavior of beta-type Ti-25V-15Cr-0.2 Si titanium alloy coating by laser cladding
    Fengying Zhang, Ying Qiu, Tengteng Hu, and 3 more authors
    2020
    Link
  50. Trapped air metamaterial concept for ultrasonic sub-wavelength imaging in water
    Stefano Laureti, David A Hutchins, Lorenzo Astolfi, and 8 more authors
    2020
    Link
  51. Tailored elastic surface to body wave Umklapp conversion
    Gregory J Chaplain, Jacopo M De Ponti, Andrea Colombi, and 7 more authors
    2020
    Link
  52. Controlling ceramic-reinforcement distribution in laser cladding of MMCs
    Kamaal S Al-Hamdani, James W Murray, Tanvir Hussain, and 1 more author
    2020
    Link
  53. A new method for assessing the recyclability of powders within Powder Bed Fusion process
    Nima E Gorji, Prateek Saxena, Martin Corfield, and 9 more authors
    2020
    Link
  54. top30/WWeOtg8bX_EC.svg
    The influence of iron in minimizing the microstructural anisotropy of Ti-6Al-4V produced by laser powder-bed fusion
    Marco Simonelli, David Graham McCartney, Pere Barriobero-Vila, and 4 more authors
    2020
    Link
  55. Laser Induced Phased Arrays (LIPA) to detect nested features in additively manufactured components
    Don Pieris, Theodosia Stratoudaki, Yashar Javadi, and 5 more authors
    2020
    Link
  56. Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion, Addit. Manuf. 30 (2019) 100846
    S Catchpole-Smith, RRJ Sélo, AW Davis, and 3 more authors
    2019
    Link
  57. Spheroidisation of metal powder by pulsed electron beam irradiation
    JW Murray, M Simonelli, A Speidel, and 2 more authors
    2019
    Link
  58. Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X
    D Hickman, I Ashcroft, S Sharma, and 4 more authors
    2019
    Link
  59. Spatially resolved acoustic spectroscopy towards online inspection of additive manufacturing
    D Pieris, R Patel, P Dryburgh, and 6 more authors
    Insight-Non-Destructive Testing and Condition Monitoring, 2019
    Link
  60. Microstructure and properties of Ti-6Al-4V fabricated by low-power pulsed laser directed energy deposition
    Hua Tan, Mengle Guo, Adam T Clare, and 3 more authors
    2019
    Link
  61. Paul Dryburgh, Don Pieris, Filomeno Martina, and 6 more authors
    2019
  62. Laser powder bed fusion of a Magnesium-SiC metal matrix composite
    Wessel W Wits, Marc Smit, Kamaal Al-Hamdani, and 1 more author
    2019
    Link
  63. A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718
    TR Walker, CJ Bennett, TL Lee, and 1 more author
    2019
    Link
  64. Absolute zero
    Julian Allwood, Jose Azevedo, Adam Clare, and 16 more authors
    2019
    Link
  65. Absolute zero: delivering the UK’s climate change commitment with incremental changes to today’s technologies
    Michael Ward, Julian M Allwood, Jose Azevedo, and 16 more authors
    2019
    Link
  66. Influence of contact area on the sliding friction and wear behaviour of an electrochemical jet textured Al-Si alloy
    JC Walker, Stefano Cinti, TJ Kamps, and 2 more authors
    2019
    Link
  67. top30/RMgMIBzvq-4C.svg
    Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion
    Sam Catchpole-Smith, Richard RJ Sélo, AW Davis, and 3 more authors
    2019
    Link
  68. Oscillatory behaviour in the electrochemical jet processing of titanium
    Alistair Speidel, Jonathon Mitchell-Smith, Ivan Bisterov, and 1 more author
    2019
    Link
  69. Heat-treatment and mechanical properties of cold-sprayed high strength Al alloys from satellited feedstocks
    Kamaal S Al-Hamdani, James W Murray, Tanvir Hussain, and 1 more author
    2019
    Link
  70. Development of metal matrix composites by direct energy deposition of ‘satellited’powders
    PK Farayibi, TE Abioye, A Kennedy, and 1 more author
    2019
    Link
  71. Wear performance of TiC/Fe cermet electrical discharge coatings
    Samer J Algodi, James W Murray, Paul D Brown, and 1 more author
    2018
    Link
  72. creep-in718-pbf.jpg
    Creep behaviour of inconel 718 processed by laser powder bed fusion
    Zhengkai Xu, CJ Hyde, C Tuck, and 1 more author
    2018
    Link
  73. Transitory electrochemical masking for precision jet processing techniques
    Jonathon Mitchell-Smith, Alistair Speidel, and AT Clare
    2018
    Link
  74. Modelling of single spark interactions during electrical discharge coating
    Samer J Algodi, Adam T Clare, and Paul D Brown
    2018
    Link
  75. On the machinability of directed energy deposited Ti6Al4V
    Olusola Oyelola, Pete Crawforth, Rachid M’Saoubi, and 1 more author
    2018
    Link
  76. top30/DXE8ND7PrJAC.svg
    Effect of post processing on the creep performance of laser powder bed fused Inconel 718
    Z Xu, JW Murray, CJ Hyde, and 1 more author
    2018
    Link
  77. The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes
    Zhengkai Xu, J Dunleavey, M Antar, and 5 more authors
    2018
    Link
  78. Crystallographic texture can be rapidly determined by electrochemical surface analytics
    Alistair Speidel, Rong Su, Jonathon Mitchell-Smith, and 7 more authors
    2018
    Link
  79. Targeted rework strategies for powder bed additive manufacture
    Matthias Hirsch, Paul Dryburgh, Sam Catchpole-Smith, and 5 more authors
    2018
    Link
  80. Specific and programmable surface structuring by electrochemical jet processing
    Ivan Bisterov, Jonathon Mitchell-Smith, Alistair Speidel, and 1 more author
    2018
    Link
  81. Human skeletal stem cell response to multiscale topography induced by large area electron beam irradiation surface treatment
    Vitali Goriainov, Richard B Cook, James W Murray, and 4 more authors
    2018
    Link
  82. Novel nucleation mechanisms through satelliting in direct metal deposition of Ti-15Mo
    Fengying Zhang, Min Mei, Kamaal Al-Hamdani, and 2 more authors
    2018
    Link
  83. The importance of microstructure in electrochemical jet processing
    Alistair Speidel, Jonathon Mitchell-Smith, Ivan Bisterov, and 1 more author
    2018
    Link
  84. Direct metal deposition of TiB2/AlSi10Mg composites using satellited powders
    Hua Tan, Dapeng Hao, Kamaal Al-Hamdani, and 3 more authors
    2018
    Link
  85. Defect detection and monitoring in metal additive manufactured parts through deep learning of spatially resolved acoustic spectroscopy signals
    Jacob Williams, Paul Dryburgh, Adam Clare, and 2 more authors
    2018
    Link
  86. top30/PQEM9vzQD9gC.svg
    Spatter and oxide formation in laser powder bed fusion of Inconel 718
    B Szost, X Wang, D Johns, and 3 more authors
    2018
    Link
  87. top30/qmtmRrLr0tkC.svg
    A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks
    Marco Simonelli, Nesma T Aboulkhair, Philip Cohen, and 4 more authors
    2018
    Link
  88. Process mechanisms based on powder flow spatial distribution in direct metal deposition
    Hua Tan, Weixun Shang, Fengying Zhang, and 4 more authors
    2018
    Link
  89. Defect-free TiC/Si multi-layer electrical discharge coatings
    JW Murray, RB Cook, N Senin, and 2 more authors
    2018
    Link
  90. Precision enhanced electrochemical jet processing
    Adam T Clare, Alistair Speidel, Ivan Bisterov, and 2 more authors
    2018
    Link
  91. Advancing electrochemical jet methods through manipulation of the angle of address
    Jonathon Mitchell-Smith, Alistair Speidel, and AT Clare
    2018
    Link
  92. Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy
    Rikesh Patel, Matthias Hirsch, Paul Dryburgh, and 7 more authors
    2018
    Link
  93. Machining of functionally graded Ti6Al4V/WC produced by directed energy deposition
    Olusola Oyelola, Pete Crawforth, Rachid M’Saoubi, and 1 more author
    2018
    Link
  94. top30/_AeoHAGD03cC.svg
    A comparative study of Inconel 625 laser cladding by wire and powder feedstock
    TE Abioye, PK Farayibi, and AT Clare
    2017
    Link
  95. Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture
    Fengying Zhang, Meng Yang, Adam T Clare, and 3 more authors
    2017
    Link
  96. Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material
    JC Walker, TJ Kamps, JW Lam, and 2 more authors
    2017
    Link
  97. Staged thermomechanical testing of nickel superalloys produced by selective laser melting
    Zhengkai Xu, Christopher J Hyde, Adam Thompson, and 4 more authors
    2017
    Link
  98. Formation mechanism of electrical discharge TiC-Fe composite coatings
    JW Murray, Samer J Algodi, Mike W Fay, and 2 more authors
    2017
    Link
  99. Cold sprayed metal-ceramic coatings using satellited powders
    KS Al-Hamdani, JW Murray, T Hussain, and 2 more authors
    2017
    Link
  100. top30/nPT8s1NX_-sC.svg
    Fractal scan strategies for selective laser melting of ‘unweldable’nickel superalloys
    Sam Catchpole-Smith, Nesma Aboulkhair, Luke Parry, and 3 more authors
    2017
    Link
  101. top30/nqdriD65xNoC.svg
    Materials for additive manufacturing
    David Bourell, Jean Pierre Kruth, Ming Leu, and 4 more authors
    2017
    Link
  102. Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy
    Matthias Hirsch, S Catchpole-Smith, R Patel, and 5 more authors
    2017
    Link
  103. top30/s85pQhAUCrAC.svg
    Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces
    Andrea Colombi, Victoria Ageeva, Richard J Smith, and 7 more authors
    2017
    Link
  104. In-situ synthesis of titanium aluminides by direct metal deposition
    S Catchpole-Smith, and Adam T Clare
    2017
    Link
  105. Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture
    Matthias Hirsch, Rikesh Patel, Wenqi Li, and 4 more authors
    2017
    Link
  106. top30/z8nqeaKD1nsC.svg
    Energy distribution modulation by mechanical design for electrochemical jet processing techniques
    Jonathon Mitchell-Smith, Alistair Speidel, Jennifer Gaskell, and 1 more author
    2017
    Link
  107. Electrolyte jet machining of titanium alloys using novel electrolyte solutions
    Alistair Speidel, Jonathon Mitchell-Smith, Darren A Walsh, and 2 more authors
    2016
    Link
  108. top30/AzKEL7Gb_04C.svg
    Manufacturing at double the speed
    Julian M Allwood, Tom HC Childs, Adam T Clare, and 15 more authors
    2016
    Link
  109. top30/BJrgspguQaEC.svg
    Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel
    Samer J Algodi, James W Murray, Michael W Fay, and 2 more authors
    2016
    Link
  110. Additive Manufacturing
    2016
    Link
  111. top30/G1UMdFYMoxkC.svg
    Spatially resolved acoustic spectroscopy for selective laser melting
    Richard J Smith, Matthias Hirsch, Rikesh Patel, and 3 more authors
    2016
    Link
  112. Surface modification of mild steel using a combination of laser and electrochemical processes
    Alistair Speidel, Adrian Hugh Alexander Lutey, Jonathon Mitchell-Smith, and 5 more authors
    2016
    Link
  113. A parametric study on laser cladding of Ti-6Al-4V wire and WC/W 2 C powder
    PK Farayibi, TE Abioye, and AT Clare
    2016
    Link
  114. top30/KWzIFqRkAKkC.svg
    Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating
    TE Abioye, PK Farayibi, DG McCartney, and 1 more author
    2016
    Link
  115. top30/NMlhSUseqAsC.svg
    Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
    Ian Maskery, NT Aboulkhair, MR Corfield, and 6 more authors
    2016
    Link
  116. Physical and electrical characteristics of EDM debris
    James W Murray, Jin Sun, DV Patil, and 2 more authors
    2016
    Link
  117. top30/RtRctb2lSbAC.svg
    Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
    Sarah K Everton, Matthias Hirsch, Petros Stravroulakis, and 2 more authors
    Materials & Design, 2016
    Link
  118. top30/s9ia6_kGH2AC.svg
    Machining of additively manufactured parts: implications for surface integrity
    Olusola Oyelola, Peter Crawforth, Rachid M’Saoubi, and 1 more author
    2016
    Link
  119. Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography
    Guangying Guan, Matthias Hirsch, Wahyudin P Syam, and 3 more authors
    2016
    Link
  120. top30/Zh0EY9V9P6UC.svg
    Electrochemical jet machining of titanium: overcoming passivation layers with ultrasonic assistance
    J Mitchell-Smith, and AT Clare
    2016
    Link
  121. Surface improvement of laser clad Ti–6Al–4V using plain waterjet and pulsed electron beam irradiation
    PK Farayibi, TE Abioye, JW Murray, and 2 more authors
    2015
    Link
  122. top30/A8cqit5AE6sC.svg
    Laser cladding of Inconel 625 wire for corrosion protection
    TE Abioye, DG McCartney, and AT Clare
    2015
    Link
  123. Functionally graded Ni-Ti microstructures synthesised in process by direct laser metal deposition
    TE Abioye, PK Farayibi, P Kinnel, and 1 more author
    2015
    Link
  124. Evaluation of selective laser sintering processes by optical coherence tomography
    Guangying Guan, Matthias Hirsch, Zeng Hai Lu, and 5 more authors
    2015
    Link
  125. Soluble abrasives for waterjet machining
    F Boud, JW Murray, LF Loo, and 2 more authors
    2014
    Link
  126. Selective surface texturing using electrolyte jet machining
    Takuma Kawanaka, Shigeki Kato, Masanori Kunieda, and 2 more authors
    2014
    Link
  127. Toward more realistic viscosity measurements of tyre rubber–bitumen blends
    Davide Lo Presti, Claudia Fecarotti, Adam T Clare, and 1 more author
    2014
    Link
  128. Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation
    JW Murray, JC Walker, and AT Clare
    2014
    Link
  129. Erosion resistance of laser clad Ti-6Al-4V/WC composite for waterjet tooling
    PK Farayibi, JW Murray, L Huang, and 3 more authors
    2014
    Link
  130. The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy
    JC Walker, JW Murray, Mengyan Nie, and 2 more authors
    2014
    Link
  131. Laser cladding of rail steel with Co–Cr
    AT Clare, O Oyelola, TE Abioye, and 1 more author
    2013
    Link
  132. Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation
    TE Abioye, J Folkes, AT Clare, and 1 more author
    2013
    Link
  133. top30/hqOjcs7Dif8C.svg
    A parametric study of Inconel 625 wire laser deposition
    TE Abioye, J Folkes, and AT Clare
    2013
    Link
  134. Amorphous layer formation in Al86. 0Co7. 6Ce6. 4 glass-forming alloy by large-area electron beam irradiation
    CL Li, JW Murray, KT Voisey, and 2 more authors
    2013
    Link
  135. Pulsed electron beam surface melting of CoCrMo alloy for biomedical applications
    JC Walker, RB Cook, JW Murray, and 1 more author
    2013
    Link
  136. TEM study on the electrical discharge machined surface of single-crystal silicon
    JW Murray, MW Fay, M Kunieda, and 1 more author
    2013
    Link
  137. Laser deposition of Ti-6Al-4V wire with WC powder for functionally graded components
    PK Farayibi, JA Folkes, and AT Clare
    2013
    Link
  138. Surface finishing of intricate metal mould structures by large-area electron beam irradiation
    JW Murray, PK Kinnell, AH Cannon, and 2 more authors
    2013
    Link
  139. Laser cladding for railway repair and preventative maintenance
    Adam Clare, Olusola Oyelola, Janet Folkes, and 1 more author
    2012
    Link
  140. Dry sliding friction and wear behaviour of an electron beam melted hypereutectic Al–Si alloy
    JC Walker, J Murray, S Narania, and 1 more author
    2012
    Link
  141. Workpiece debris deposition on tool electrodes and secondary discharge phenomena in micro-EDM
    J Murray, D Zdebski, and AT Clare
    2012
    Link
  142. Repair of EDM induced surface cracks by pulsed electron beam irradiation
    JW Murray, and AT Clare
    2012
    Link
  143. top30/9yKSN-GCB0IC.svg
    Cladding of pre-blended Ti–6Al–4V and WC powder for wear resistant applications
    PK Farayibi, J Folkes, A Clare, and 1 more author
    2011
    Link
  144. Linear ion trap fabricated using rapid manufacturing technology
    Adam T Clare, Liang Gao, Boris Brkić, and 2 more authors
    2011
    Link
  145. Development of quadrupole mass spectrometers using rapid prototyping technology
    Boris Brkić, Neil France, Adam T Clare, and 3 more authors
    2009
    Link
  146. Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications
    Adam T Clare, Paul R Chalker, Sean Davies, and 2 more authors
    2008
    Link
  147. Selective laser sintering of barium titanate–polymer composite films
    AT Clare, PR Chalker, S Davies, and 2 more authors
    2008
    Link
  148. Fractal scan strategies for selective laser melting of ‘unweldable’nickel superalloys, Addit. Manuf. 15 (2017) 113–122
    S Catchpole-Smith, N Aboulkhair, L Parry, and 3 more authors
    2008
    Link